HOW TO BLEED SOLUTION LINES
WITHOUT ELECTRIC INSTANT WATER HEATER:
1. Fill solution tank with clean water.
2. Turn pump switch “ON”.
4. Open the spray trigger valve on the extractor (see Image 17.1), and spray until all air is out from the solution
system. It might take 2-4 minutes depending on the jet size of the extractor power head.
17
WITH ELECTRIC INSTANT WATER HEATER:
WARNING: DO NOT TURN ON THE HEATER until you have followed these steps.
1. Fill solution tank with clean water.
2. Turn pump switch to “ON”.
4. Open the spray trigger valve on the extractor (see Image 17.1), and spray until all air is out from the solution
system. It might take 2-4 minutes depending on the jet size of the extractor power head.
5. Turn heater switch on and wait approximately 3-4 minutes to heat up. Now the unit is ready to use with the
heater.
(extractor without optional
ATTACHMENT
)
Recovery
hose
Drain hose
Spray trigger
Power head switches
Image 17.1
Inline filter
(solution)
Cleaning Position (lower position of power head)
Recovery tank lid
Solution tank lid
Lower extractor
power head
Image 17.2
Spray trigger
