PREVENTATIVE MAINTENANCE
12
Vacuum filter
Ball float cage
NO VACUUM FILTER INSTALLED
Vacuum filter
assembly
Without vacuum
filter
The vacuum filter must be always
clean and in good condition
to protect the vacuum motor.
(See image 12.1)
Serious damage
to the vacuum motors
will occur when the vacuum filter is not
installed. (See image 12.2)
Image 12.1
Image 12.2
[Part #: PM10150]
AFTER EACH USE: CLEAN, LUBRICATE, ETC...
1.Thoroughly clean all equipment and accessories after each use.
a. Rinse solution tank, recovery tank, and hoses with clean water.
b. Flush entire solution system with clean water. This includes all solution hoses and attachment tool.
Do not allow liquid with cleaning chemicals to remain in the equipment.
c. Clean all filters (Image 12.1, 12.2)
2. Lubricate all quick connects as needed.
3. Do not use the same container you use to fill the solution tank to empty the waste tank. This would result in
putting dirt and debris into the solution lines that will block filters, orifices, and generally degrade the systems.
4. Keep equipment out of extreme temperatures. (i.e. Freezing temperatures will make water expand, and will
damage pump, fittings, valves, etc.)
5. Turn off the extractor whenever is not in use. Do not walk away from the extractor while is on.
6. Check for loose or frayed wires.
