14
TO ADD OIL:
The hydraulic cylinder assembly contains hydraulic fluid that must be kept at approximately 80% full at all times for
proper operation. To check the oil level and to fill remove oil filler plug
1. Fully retract the hydraulic ram.
4.Screw the oil plug.
2. Unscrew the oil plug.(P1)
3.Fill the oil case.
KEEP DIRT AND OTHER MATERIAL CLEAR WHEN POURING.
ADDITIONAL WARNINGS:
1.DO NOT USE MOTOR OIL IN THE JACK.
2.ONLY USE ANTI-FOAMING JACK OIL.
3.ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
4.DO NOT USE HYDRAULIC BRAKE FLUID, AALCOHOL,GLYCERINE,DETERGENT,MOTOR OIL OR DIRTY OIL.
5. USE OF A NON-RECOMMENDED FLUID CANCAUSE DAMAGE TO A JACK.
6. AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID,TURBINE OIL,
TRANSMISSION FLUID,MOTOR OIL OR GLYCERIN.IMPROPER FLUID CAN CAUSE PREMATURE FAILURE OF
THE JACK AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.
7. DISPOSE OF HYDRAULIC FLULD IN ACCORDANCE WITH LOCAL REGULATIONS.
WWW.TMGINDUSTRIAL.COM
P14/19
Toll Free:1-877-761-2819
