7.4 OPERATION
4-1. As the engine warms up, gradually move
the choke lever to the
OPEN
position. (Fig-8)
4-2. Move the speed control lever from the
LOW to the HIGH position. When the engine
speed reaches approximately 2,300-2,600 PRM,
the centrifugal clutch engages. If the engine
speed increased very slowly, it is possible that
the clutch can slip. Do not operate the speed
control lever slowly. (Fig-9,10)
OIL ALERT SYSTEM (Optional)
The Oil Alert system is designed to prevent
engine damage caused by an insufficient amount
of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the Oil
Alert System will automatically stop the engine
(the engine switch will remain in the ON
position).
NOTICE
If the engine stops and will not restart, check
the engine oil level.
4-3. When compacting asphalt, it is advisable to
paint the bottom face of the vibrating plate with
diesel fuel. This will assist in preventing the
plate from sticking to the asphalt.
4-4. When shutting off the vibrator, turn the speed control lever from the HIGH to LOW position. Do not
move the speed control lever slowly.
7.5 TRANSPORTATION
5-1. Be sure to stop the engine while transporting.
5-2. Screw up the fuel tank cap securely and close the fuel valve to avoid fuel leaking.
5-3. In transportation by car, fix machine securely not to move nor to fall down.
In case of driving for long distance or at off-road, take out fuel from tank.
WWW.TMGINDUSTRIAL.COM
P
2
/
18
Toll Free:1-877-761-2819
WWW.TMGINDUSTRIAL.COM
P
10
/
18
Toll Free:1-877-761-2819
