TMG TMG-GSB30, Product Manual

Page: 8 / 35

Filling with Gasoline and Oil
WARNING:
FUEL IS HIGHLY FLAMMABLE AND POISONOUS ALWAYS FILL THE TANK WITH ENGINE OFF AND
COOL.
ALWAYS CHECK THE FUEL LEVEL BEFORE OPERATING.
Allow the engine to cool for at least two minutes before removing the fuel cap.
1. Place the snow blower on a level surface outdoors to fuel.
2. The fuel tank holds approximately 1.1 gallons of fuel. 87+
octane unleaded gasoline is recommended. Do not fill above
the top of the fuel filter. Replace the fuel cap securely and
wipe any excess from the fuel tank before starting the snow
blower.
WARNING:
DO NOT REFUEL INDOORS OR NEAR ANY SOURCE OF
POSSIBLE COMBUSTION.
DO NOT SMOKE WHILE FUELING.
DO NOT OVERFILL.
THE SNOW BLOWER IS SHIPPED WITHOUT
FLUIDS.YOU MUST ADD OIL BEFORE STARTING
THE ENGINE.
3. Add engine oil to the upper level of the oil filler hole.
SAE 10/30 motor oil is recommended for most
environmental conditions. The oil capacity is 1 quart (0.95L).
Note: Do not thread the dipstick in when checking the oil level.
www.tmgindustrial.com 08/35 Toll Free:1-877-761-2819