6
2. Layout
1. Bit chuck
2. Lamp
3. Locking button
4. Battery capacity indicator
5. Handle
6. Charging control lamp
7. Charging connection
9. Clockwise/Counter-clockwise selector switch
10. Battery charger
11. Charging cable
12. Locking sleeve
3. Proper use
The cordless screwdriver is designed for
tightening and undoing screws.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
4. Technical data
Motor power supply: 3.6 V DC
Idling speed: 210 min
-1
Clockwise/Counter-clockwise: Yes
Charge voltage for rechargeable battery: 5.5 V DC
Charge current for rechargeable battery: 600 mA
Battery charger supply voltage:
100-240 V~ / 50/60 Hz
Charging time: 3-5 hours
Battery type: Li-Ion/1.3 Ah
Weight: 415 g
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
57.5 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 68.5 dB (A)
K
WA
uncertainty 3 dB
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions)
determined in accordance with EN 60745.
Screwing without hammer action
Vibration emission value a
h
<2,5 m/s
2
K uncertainty = 1,5 m/s
2
Important!
The vibration value changes according to the
area of application of the electric tool and
circumstances.
5. Before starting the equipment
Be sure to read the following information before
time:
1. Charge the battery pack with the charger
supplied.
2. Only ever use screwdriver bits which are
suitable for the purpose and in faultless
condition.
3. Always check for concealed electric cables and
gas and water pipes when drilling and screwing
in walls.
6. Operation
6.1 Charging the battery (Fig. 1)
The battery is protected from exhaustive
GB
13. Work light switch button
14. Work light
