4.2 Greasing
1)
Manual Greasing System
Apply grease to grease nipple on front head every 3 hours.
Adapt grease interval and amounts to tool wear rates and working conditions.
NOTICE
Tool shank must be well lubricated before installed in front head.
While greasing, hydraulic breaker must be upright against the tool.
To ensure that grease will penetrate between tool and inner bush.
Recommended Lubricant Greases
MAKER
GREASE
Esso
Beacon Q2
Shell
Retinax AM
Mobil 1
Mobil 1 Grease special
1)
The Post driver hammer must be in a vertical position to grease,
with enough down-pressure to push the tool up inside the housing.
2)
Grease until clean grease oozes out around the tool and retainer pins.
3)
Grease the Post driver hammer after every two hours of continuous use,
or when the tool appears shiny where it rides inside the front head.
▲CAUTION!
Grease often. Failure to lubricate regularly reduces the life of the tool, bushings, and front head.
If the tool becomes dry and shiny during the shift, apply additional grease.
○
STANDING UP
×
DOWN
WWW.TMGINDUSTRIAL.COM
P8/23
Toll Free:1-877-761-2819
