4) Do not allow the Post driver hammer to fall to drive the pile.
Dropping the Post driver hammer onto the pile will apply excessive force to the Post driver hammer or the base
machine, causing damage to many parts of the Post driver hammer and the base machine.
Let the driver press the pile to drive it into the ground.
5) Do not lift things with the Post driver hammer.
Lifting materials by hanging wire in the bracket or the Tool not only causes damage to
the Post driver hammer but also is very dangerous when operating.
6) Warm up base machine engine Prior to Operation
Especially in winter, the base machine engine should be warmed up for five to ten minutes
(about oil temperature 30
℃
~40
℃
/80
℉
~105
℉
) before Post driver hammer operation.
Follow the Instruction Book for the Base Machine for warming-up of the engine.
7) Do not touch the Tool during post driver hammer operation.
During Post driver hammer operation, the Post driver hammer parts can reach high temperatures.
8) When operating the Post driver hammer you must use the ear, eye and breathing
protection.
9) Greasing danger
With the Post driver hammer mounted on the machine, apply down pressure on the Driver Tool.
And fill cavity with the recommended grease through the marked grease nipple.
10) Always wear the eye protection when removing the stop pin.
Remove the stop pin by doing it in and out with a punch and hammer.
WWW.TMGINDUSTRIAL.COM
P11/23
Toll Free:1-877-761-2819
