WARNING:
Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules
and other basic safety precautions may result in serious personal injury.
WARNING:
The warnings, cautions, and instructions discussed in this instruction manual
WARNING:
To prevent personal injury, perform Pressure Relief Procedure before and after operating the control
valve and before performing any disassembly or assembly.
WARNING:
No complying with below requests will result in severe harm to your body even death.
Hose Reel
cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and
caution are factors that cannot be built into this product, but must be supplied by the operator.
1.Keep the work area clean and dry. Damp or wet work areas can result in injury.
2.Keep children away from work area. Do not allow children to handle this product.
3.Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock
up tools and equipment, and keep out of reach of children.
4.Use the right tool for the job. Do not attempt to force small equipment to do the work of larger industrial equipment. There
are certain applications for which this equipment was designed. It will do the job better and more safely at the capacity for
which it was intended. Do not modify this equipment, and do not use this equipment for a purpose for which it was not
intended.
5.Use proper eye protection when assembling and using the kit.
6.Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace damaged
or worn parts immediately.
7.Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etc.
8.DO NOT use the equipment when tired or under the influence of drugs, alcohol, or medication. A moment of inattention
while operating this equipment may result in serious personal injury.
9.Industrial applications must follow OSHA requirements.
1. EQUIPMENT MISUSE HAZARD: Equipment misuse can cause the equipment to rupture or malfunction and result in
serious injury.
2. Only trained or authorized people should operate this kit.
3. Read all instruction manuals, tags, and labels before you operate this equipment
4. Use the equipment only for its intended purpose. If you are not sure, call the distributor.
5. Do not modify this equipment. If you need to replace the parts, use the standard parts or components.
6. Check equipment daily. Repair or replace worn or damaged parts immediately.
7. Do not exceed the maximum working pressure of the lowest rated system component. This equipment has a 580 PSI
maximum working pressure.
8. Make sure all application comply with local, state, and national fire, electrical, and safety regulations.
WWW.TMGINDUSTRIAL.COM
P13/20
Toll Free:1-877-761-2819
