４ＧＢＧ１００９
PVU-L0800GR / PVU-L0840GR / PVU-L0880GR Installation Manual
7
2.3. Storage environment
■
Do not store the inverter in locations that are exposed to extreme
temperature/humidity variations
Extreme storage temperatures and condensation may cause performance
degradation and/or equipment failure.
Do not install the inverter in an environment outside of the following
requirements.
Requirement of Storage Environment
：
Ambient temperature -35
～
50
℃
Relative humidity less than 95% (No condensation)
■
The inverter must be stored indoors
The inverter shall not be stored outdoors and exposed to rain, wind and/or
condensation (produced by temperature variation) to prevent performance
degradation and/or equipment failure unless it has been fully assembled with its
input and output terminals sealed and roofs installed. Note that the inverter roof
is shipped separately from the main unit.
■
Do not store the inverter in locations with considerable amount of fine
particles that may contain iron and/or organic compounds
It may cause insulation failure, contact failure in circuit breakers and switches,
performance degradation and/or equipment failure.
■
Do not store the inverter in places where vibrations(
※
1) or mechanical
shocks(
※
2) may occur
Vibrations or shocks may cause system performance degradation and/or
equipment failure.
※
1
・※
2
：
Refer to “Inverter installation environment” in section 5.1 for details
■
Do not store the inverter in places exposed to air containing salts,
corrosive gases (
※
3) and/or vapor containing water or oil
If stored in a place where one of the above elements is present, contact failure in
circuit breakers and switches may occur, and may lead to performance
degradation and/ or equipment failure.
※
3
：
Refer to “Inverter installation environment” in section 5.1 for details
CAUTION
Forbidden
Mandatory
Forbidden
Forbidden
Forbidden
