TMC TI6NBF+, User Manual

Page: 49 / 80

Chapter 6 BIOS and System Setup
Pentium II /III ATX Motherboard User’s Manual 45
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI Function : Enabled Primary INTR : ON
Power Management : User Define IRQ3 (COM2) : Primary
PM Control by APM : Yes IRQ4 (COM1) : Primary
Video Off Option : Suspend IRQ5 (LPT 2) : Primary
Video Off Method : V/H SYNC +Blank IRQ6 (Floppy Disk) : Primary
Modem Use IRQ : 3 IRQ6 (Floppy Disk) : Primary
Soft-Off by PWRBTN : Instant-Off IRQ7 (LPT 1) : Primary
HDD Power Down : Disabled IRQ8 (RTC Alarm) : Disabled
Doze Mode : Disabled IRQ9 (IRQ2 Redir) : Secondary
Suspend Mode : Disabled IRQ10 (Reserved) : Secondary
** PM Events ** IRQ11 (Reserved) : Secondary
VGA : OFF IRQ12 (PS/2 Mouse) : Primary
LPT & COM : LPT / COM IRQ13 (Coprocessor) : Primary
HDD & FDD : ON IRQ14 (Hard Disk) : Primary
DMA / master : OFF IRQ15 (Reserved) : Disabled
PWR-On by Modem/LAN : Disabled ESC : Quit
Ç È Æ Å
: Select Item
RTC Alarm Resume : Disabled F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
For VIA Apollo Pro Plus (82C693) chipset
ACPI Function
This field allows you to enable or disable the ACPI (Advanced
Configuration Power Interface) function on the motherboard.
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which ranges
from 1 min. to 15 min. (Default)
NOTE: In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.
PM Control by APM
This field allows you to use the Advanced Power Management device to
enhance the Max. Power Saving mode and stop the CPU’s internal clock. If
the Max. Power Saving is not enabled, this will be preset to NO.