![TMC TI5VG User Manual Download Page 7](http://html1.mh-extra.com/html/tmc/ti5vg/ti5vg_user-manual_1121703007.webp)
Chapter 2 Specifications
TI5VG Pentium VP3 ATX Motherboard User’s Manual
3
Onboard Bus Mastering EIDE
Two EIDE interfaces for up to four devices, support PIO Mode 3/4
or Ultra DMA/33 IDE Hard Disk and ATAPI CD-ROM.
BIOS
Licensed BIOS with additional features:
•
FLASH EEPROM (128KB) for BIOS update
•
ISA Plug and Play (PnP) extension
•
Power management
Hardware Monitoring (optional)
Monitoring for system temperature, system voltage and fan speed.
The monitoring status are shown in the BIOS.
Windows 95 Shut-Down
This allows the PC to power off via Windows 95 operating system.
AGP Support (Accelerated Graphics Port)
The TI5VG motherboard comes with an AGP slot for an AGP VGA
card that supports 133MHz 2X mode for texture mapping,
z-buffering and alpha blending. AGP will allow 3D applications to
run faster.
PC’97 Compliance
The BIOS and hardware levels of TI5VG meet PC’97 compliance.
The new PC’97 requirements for systems and components are based
on the following high-level goals: Support for Plug and Play
compatibility and power management for configuring and managing
all system components, and 32-bit device drivers and installation
procedures for both Windows 95 and Windows NT.
Expansion Slots
Four 32-bit PCI slots
Three 16-bit ISA slots
One AGP slot
Form Factor
ATX, 12”x8.9” (30.5cm x 22.5cm)