Chapter 6 BIOS Configuration
TI5VG Pentium VP3 ATX Motherboard User’s Manual
43
AGP 2X Mode
Enabling this field will allow your AGP VGA card switch to the 133MHz
transfer mode if your graphics card supports it. If disabled, the AGP is in
1X mode (66MHz). The default setting is
Disabled
.
OnChip USB
This field allows you either to enable or disable the USB function. By
default, this field is set to
Disabled.
CPU Warning Temperature
The optional hardware thermal sensor monitors CPU temperature
changes and prevents the CPU from overheating. Alert is sounded
through the system’s speaker and CPU speed slows down when the
temperature exceeds the threshold set in the BIOS until it falls below a
safe level. By default, this field is set to
Disabled.
Current CPU Temperature
This optional and read-only field shows the current CPU temperature as
monitored by the optional LM75 hardware monitoring device.
Current System Temperature
This optional and read-only field shows the current system temperature
as monitored by the optional LM78 hardware monitoring device.
CPU and Chassis Fan Speed
These optional and read-only fields show the current speeds in RPM
(revolution per minute) for the CPU fan and Chassis fan as monitored by
the optional LM78 hardware monitoring device.
VIO / VCORE
These optional and read-only fields show the current voltages in the
voltage regulators and power supply as monitored by the optional LM78
hardware monitoring device.
