TMC
Page 6
Installation Instructions
Choosing a Viewing Location
Congratulations on the purchase of your mobile adjustable flat-panel cart.
Your mobile flat-panel cart has been designed and built with ease of operation and assembly in mind.
Please read these guidline instructions once thoroughly before attempting to unpack and assemble your cart.
Please take a minute to familiarize yourself with the contents of the package and make sure you have all the parts and
tools you need to safely complete the assembly.
In addition, some steps of these instructions may require two people to prevent personal injury and/or damage to your
mobile flat-panel cart/flat-panel. Please observe all warnings in the following installation procedure and utilize proper
safety equipment at all times.
Unpacking and Assembling the Mobile Flat-Panel Cart
Introduction
Inspecting Cart
Removing TAP-it From Packaging
•
Inspect the mobile flat-panel cart for any damage that
may have occured during shipping.
•
Remove the individually sealed up box located
behind the cart unit. This box contains the laptop shelf.
•
Remove the vertical cardboard support braces that
stand on both sides of the display.
•
The cart is now ready to be removed from the bottom
cardboard cradle. With at least one person located on
each side of the unit, lift up from the base tubing
to remove the unit from the cradle.
•
Once the unit has been placed onto the floor, carefully
remove the plastic bag and display cover.
•
It is recommended that all of the packaging materials be
kept and stored.
