Quality Control Checklist
Part Number: TMC-3-XX-82
ITEM
DETAILED DESCRIPTION
PASS COMMENTS
1
Cosmetic
Visually inspect assembly paint for discrepancies i.e., scratches,
blemishes, dings, etc.
2
Lift Columns
Physically test the unit by moving it up and down using the remote
control a minimum 5 times.
3
Tilt Actuator
Physically test the unit by tilting it up and down using the remote
control a minimum 5 times.
4
Video
Connect the unit to a laptop and verify on/off control via the remote,
and that the laptop image displays.
5
Audio/Speakers
audio from the laptop source can be heard.
6
Cable Passage
Check that all cables passageways are clear and that all cables do
not bind/kink up, and are secured in place.
7
Secured Screws
Check that all screws are tight and fastened properly.
8
Casters
Check that all (4) casters are tight and functional, including the
locking mechanism.
Connect the TAP-it cart power cord to the Hipot tester, and connect
the ground cable to a bare metal contact point. Press test button
9
Hipot and Ground
Test
10
Inspection Sticker
Check the sticker for operators initials on all testing conducted and
deemed acceptable.
Check that each of the following items are included:
□
NEC Naviset document
□
NEC LCD
4215
/
V423
set-up manual
□
NEC LCD software and documentation CD-ROM
□
11
Accessories Bag
NEC SP-4046 speaker quick start guide
□
NEC remote control
□
NEC main power cover and screws
□
Set of AA batteries
□
PC velcro strap
□
TAP-it user manual
12
Product Packaging
Check that the unit is properly packed and protected for shipment.
Inspector:
Date:
Tap-It Serial #:
NEC Display Serial #:
Installation Instructions
Page 11
TMC
TMC-3 Cart Checklist
9541-000-000-0X REV.
1
