TMC MI5VP4, User Manual

Page: 58 / 85

Chapter 6 BIOS Configuration
54 MI5VP4 User’s Manual
6.10 Integrated Peripherals
This option sets your hard disk configuration, mode and port.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALSP
AWARD SOFTWARE INC.
On-Chip IDE Channel 0 : Enabled Onboard Parallel Port : 378/IRQ7
On-Chip IDE Channel 1 : Enabled Parallel Port Mode : Normal
IDE Prefetch Mode : Disabed
IDE HDD Block Mode : Enabled
Primary Master PIO : Auto
Primary Slave PIO : Auto Onboard legacy Audio : Enabled
Secondary Master PIO : Auto Sound Blaster : Enabled
Secondary Slave PIO : Auto SB I/O Base Address : 220H
Primary Master UDMA : Auto
SB IRQ Select : IRQ 5
Primary Slave UDMA : Auto SB DMA Select : DMA 1
Secondary Master UDMA : Auto MPU-401 : Enabled
Secondary Slave UDMA : Auto MPU-401 I/O Address : 330-333H
FM Port (388-38BH) : Enabled
Onboard FDD Controller : Enabled Game Port (200-270H) : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3 Parallel Port Mode : Normal
UART 2 Mode : Standard F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnChip IDE Channel0/1
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select
Enabled to activate each channel
separately.
IDE Prefetch Mode
This field allows your hard disk controller to use prefetch mode to
transfer data to increase the performance.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed
Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.