3
SKIMMER ASSEMBLY
The V
2
Skim 200 Compact Protein Skimmer is supplied almost fully assembled. After
unpacking and before installation you must:-
1. Ensure the skimmer collection cup (2), and collection cup lid (1) are securely and
correctly positioned on the main skimmer body (7).
INSTALLATION
The V²Skim 200 is designed for simple installation internally in the aquarium or sump.
The versatile mounting brackets supplied with the V²Skim 200 ensure that it can be
incorporated with nano and smaller volume aquariums or sumps where space is limited.
Select which method of installation - mounting brackets A (13) or mounting bracket A (13)
+ B (14) - would best suit your aquarium or sump ensuring that there is adequate space
for the collection cup to be removed for cleaning and to allow access to the skimmer for
any maintenance that may be required. For a more secure installation we recommend using
both mounting brackets.
Installation Method 1: Using Only Mounting Brackets A (13)
If you intend to use only mounting brackets A (13) for the installation of the V²Skim 200
please read the following and refer to diagram 1 below.
1. Attach theV²Skim 200 to the inside of your aquarium or sump ensuring that the suction
cups on the mounting brackets are successfully secured.
2. Ensure that the V²Skim 200 is positioned in your aquarium or sump so that the top of
the water outlet (6) on the skimmer is located approximately 5mm below the water
surface in your aquarium or sump (please see diagram 2 below) and both the water
inlet (5) and water outlet (6) are unrestricted.
Please note:
the top of the water
outlet (6) on the V²Skim 200 must not be positioned any lower than approx. 5mm
beneath the water surface as this would cause water to be drawn into the air intake (4)
on the injection system and as a result the skimmer will not perform correctly.
Diagram 2
Diagram 1
Aquarium
Water level
adjustment dial
Aquarium
Water level
Top of Water
Outlet
