Solaris Mozart One user manual version 1.2 041719
- 3 -
F
REQUENCY
S
ETTINGS
Depending on location, change the Default Frequency setting to match the mains power (e.g. North America
should be set at 60Hz). Proper frequency setting will ensure minimum number of visible artifacts when using
Solaris on camera.
S
AFETY
I
NSTRUCTIONS
•
Please keep this User Guide for future reference. If unit is sold to another user, make sure they also
receive this instruction booklet.
•
Ensure fixture and Mozart Drive are connected to proper voltage, and that line voltage is not higher than
that stated on the fixture.
•
Make sure there are no flammable materials close to the unit while operating.
•
Always disconnect from the power source before servicing or fuse replacement. Always use the fuse
specified in this manual..
•
Always use a safety cable when hanging fixture overhead.
•
Maximum ambient temperature (Ta) is 40°C (104°F). Do not operate fixture at temperatures above this
rating.
•
In the event of a serious operating problem, stop using the unit immediately. Repairs must be carried
out by trained, authroized personnel. Contact the nearest authorized technical assistance center. Only
OEM spare parts should be used.
•
Do not connect the device to a dimmer pack.
•
Make sure the 3-conductor Power+Data cord is never crimped or damaged.
•
Never disconnect 3-conductor Power+Data cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source during operation.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact your
distributor.
F
USE
R
EPLACEMENT
The Mozart Drive PortableMount uses a 4A, 250V, slow-blow, 5x20mm (0.2x0.8 in.) fuse. Mozart One
fixtures have no fuse. To replace fuse:
1. With a screwDriver turn the fuse cap counter-clockwise to remove fuse cap with fuse.
2. Replace fuse attached to fuse cap.
3. Reinsert fuse cap with new fuse and tighten clockwise.
Please read these instructions carefully. This user guide
contains important information about the installation, usage
and maintenance of this product.
Disconnect the power cord before replacing a
fuse and always replace with the same type fuse.
