SYSTEM TECHNOLOGY
Doc. No.:
ST/WI/RG/RGX4400
Revision No: 1.0
- 48 -
route entry is the default gateway).
Mask
The network mask of the destination subnet. The default
gateway uses 0.0.0.0
.
Next Hop
The IP address of the next hop through which the traffic will
flow towards the destination subnet
.
Metrics
Defines the number of hops between network nodes that
data packets travel. The default value is 0, which means
that the subnet is directly connected with the local LAN
network.
Interface
The WAN interface to which a static routing subnet is to be
applied
Add Route
Add a user-defined destination route.
Update
Update the selected destination route on the Static Route
Table.
Delete Selected
Delete a selected destination route on the Static Route Table
Show Routes
Click this button to view the device’s routing table. The IP
Route Table displays in following Figure.
6.6.2 SNMP
Simple Network Management Protocol (
SNMP
) is a popular protocol for network management. It is
used for collecting information from network devices and configuring network devices. The network
devices include servers, printers, hubs, switches, and routers on an Internet Protocol (IP) network.