TM RGX4400 Work Instructions Download

Page: 40 / 78

SYSTEM TECHNOLOGY

Doc. No.:

ST/WI/RG/RGX4400

Revision No: 1.0

- 36 -

IGMP Proxy

Enable or disable the IGMP Proxy function.

WAN interface

The WAN interface which runs IGMP Proxy function.

6.4.7 IGMP Snooping

This Page is used to enable or disable IGMP Snooping Function. IGMP snooping

is the process of

listening to

Internet Group Management Protocol

(IGMP) network traffic. The feature allows a

network switch

to listen to IGMP conversations between

hosts

and

routers. By listening to these

conversations, the switch maintains the mapping relationships between ports and IP multicast

streams. For some ports which do not need this IP multicast streams, multicast streams are filtered.

6.4.8 MLD Proxy

This page is used to enable MLD Proxy Function. The Multicast Listener Discovery (MLD) Proxy

feature provides a mechanism for a device to generate MLD membership reports for all entries or

a user-defined subset entry on the device's upstream interface.

Summary of Contents for RGX4400















































































Search results

Summary of Contents for RGX4400

Reviews:

Related manuals for RGX4400

Brands by name

Popular brands

TM RGX4400, Work Instructions

Search results

Summary of Contents for RGX4400

Reviews:

Related manuals for RGX4400

Brands by name

Popular brands