TM INDUCTION HEATING
23
ST PRO 2.3 |
ERRORS
The induction heater can display two different kinds of errors: User errors
(recognized by blue background) and Fatal errors (recognized by red
background). The type of error message determines the difficulty of the
action needed to make the induction heater function properly.
Most of the User errors are easy to solve, as
the user interface will provide a suggestion for
troubleshooting. The user should always end the
troubleshooting by restarting the heater. If the error
persists after troubleshooting the user can contact the local distributor.
Contact details for the nearest distributor on www.tminductionheating.
com/distributors
.
Fatal errors cannot be resolved without contacting
the local distributor, as the problem is caused by
an internal hardware or software error. When
encountering a Fatal error the user must note
the Error-code (found in the top righthand corner) and the operating
conditions. Operating conditions may contain a description of the part
that has been heated, the heating mode that has been used, and any
other relevant information.
