172-65592MA-07 (TM5N/TM5N-EX TrapMan Type P) 12 May 2022
39
8.5 Automatic Initialization of Settings
Pressing
8
+
8
resets the values to their factory default settings.
1. A confirmation message will appear.
Press
ENT
to execute the operation.
Press
FUNC
to cancel the operation.
2. The following items will be automatically executed:
・
Inspection data will be cleared (deleted).
・
The LOW TEMP factor will be reset to 60% (the default value).
・
The
Auto power OFF
function will be enabled.
CAUTION
Once you have started the initialization process, it cannot be canceled. For information on
setting these items individually, see "8.4 Changing Settings" and "8.6 Clearing (Deleting)
Inspection Data".
8.6 Clearing (Deleting) Inspection Data
Pressing
9
+
9
clears (deletes) all inspection data.
A confirmation message will appear:
Press
ENT
to execute the operation.
Press
FUNC
to cancel the operation.
CAUTION
It is not possible to clear only a portion of the data.
CLEAR DATA?
OK:ENT NO:FUNC
START INITIALIZE
OK:ENT NO:FUNC
