172-65592MA-07 (TM5N/TM5N-EX TrapMan Type P) 12 May 2022
25
6.1 Recalling the Control Number
Two methods are used to recall previously registered or downloaded control numbers.
1. Enter the control number directly and recall that number. (See "6.2 Entering the Control
Number" for more information.)
2. Scroll through the registered control numbers.
a. Scroll through the registered control numbers using
and
.
Holding down the key will cause the numbers to scroll automatically; after a few
seconds, they will scroll at high speed.
b. Press
ENT
to confirm that control number.
6.2 Entering the Control Number
The control number consists of a three-digit area number and a five-digit trap number.
Normally the equipment code and pipe line name code are entered for the area number and
a sequential number in the area group is assigned for the trap number.
Entering the Control Number: Example
No. 000-00000
MODEL
1. Use
AREA
NO.
and
TRAP
NO.
and
0
to
9
to enter the control number.
2. Repeatedly pressing
AREA
NO.
or
TRAP
NO.
increases the numeric value of the last digit of
each (or, in the case of letters, changes the letter in alphabetical order).
3. You may also use
SHIFT
to enter text.
Press
SHIFT
to switch to text entry mode.
To enter spaces press
when in text entry mode.
Press
SHIFT
again to exit text entry mode.
4. Press
CALL
JUDGE
or
MODIFY
JUDGE
to move the cursor left and right to position the cursor on the digit
you wish to change.
