TLV SJH Series, Instruction Manual

Page: 12 / 36

* SJHX only ** SJH only *** SJHNX, SJHN only
Note: Coat all threads with anti-seize
Model
Cover Nut 10
Orifice 4
X-element Cover 15*
Plug Cover 15**
Screen Holder 12
Air Vent Valve Seat 18*
Plug 16**
Orifice Plug 7***
Screw with Spring Washer 19**
Tightening Torque and Distance Across Flats
SJH3NX / SJH3N
SJH3VX / SJH3V
60
70
140
140
140
35
35
200
0.3
17
17
32
32
24
19
19
38
+
SJH5NX / SJH5N
SJH5VX / SJH5V
110
80
140
140
140
35
35
200
0.3
22
19
32
32
24
19
19
38
+
SJH6NX
SJH6N
130
200
140
140
400
35
35
400
0.3
22
30
32
32
50
19
19
50
+
SJH7NX / SJH7N
SJH7VX / SJH7V
mm
210
200
140
140
400
35
35
400
0.3
24
30
32
32
50
19
19
50
+
Reassembly Disassembly
Screw with Spring
Washer 19
Air Vent Strip 18
Orifice Plug 7
Orifice Plug Gasket 6
Orifice 4
Orifice Gasket 5
Screen Holder 12
Screen Holder
Gasket 11
Main Screen 13
X-element Cover 15
Plug Cover 15
X-element Cover
Gasket 14
Plug Cover Gasket 14
Spring Clip 16
X-element 17
Air Vent Valve Seat 18
Plug 16
X-element Guide 19
Guide 17
Air Vent Screen 20
Remove with a Philips
screwdriver only if necessary
to remove the air vent strip
Remove without bending
only if necessary
Use a wrench to remove
Remove gasket and clean
sealing surfaces
Use a wrench to remove
Remove gasket and clean
sealing surfaces
Use a wrench to remove
Remove gasket and clean
sealing surfaces
Remove being careful not to
bend
Use a wrench to remove
Remove gasket and clean
sealing surfaces
Use appropriate pliers,
squeeze and remove
Remove from the guide
Use a wrench to remove
Remove without bending
Remove without bending
Tighten screw to the proper
torque
Carefully reattach without
bending
Coat threads with anti-seize
and tighten to the proper torque
Replace with a new gasket,
coat surfaces with anti-seize
Coat threads with anti-seize
and tighten to the proper torque
Replace with a new gasket, do
not coat surfaces with anti-seize
Coat threads with anti-seize
and tighten to the proper torque
Replace with a new gasket,
coat surfaces with anti-seize
Insert closed end first so the open
end is at the opening in the body
Coat threads with anti-seize
and tighten to the proper torque
Replace with a new gasket,
coat surfaces with anti-seize
Squeeze and insert securely
into the groove
Make sure the X-element is
not upside down
Coat threads with anti-seize
and tighten to the proper torque
Insert securely without bending
Insert securely without bending
Part & No. SJHX SJH
－ ◯
－ ◯
◯* ◯*
◯* ◯*
◯ ◯
◯ ◯
◯ ◯
◯ ◯
◯ ◯
◯ －
－ ◯
－ ◯
－ ◯
◯ －
◯ －
◯ －
－ ◯
◯ －
◯ －
◯ －
"
◯
" indicates which models contain which parts * SJHNX and SJHN only
N·m mm N·m mm N·m mm N·m
If drawings or other special documentation were supplied for the product, any torque given there
takes precedence over values shown here.
̶ 11 ̶
English