TLV QS10 Series, Instruction Manual

Page: 15 / 44

TLV Blowdown Valve: BD2
The BD2 blowdown valve, installed in the screen area of the connector body, uses the trap’s
internal pressure to blow any condensate, steam, dirt or scale accumulated around the screen
area out to atmosphere.
BD2N (Horizontal)
Installation Orientation
When installing the blowdown valve, make sure that the discharge hole is facing towards the
ground.
Correct Incorrect
(The blowdown hole not facing the ground)
BD2V (Vertical)
Correct Incorrect
(The blowdown hole not facing the ground)
Ground Ground
Ground Ground
English
̶ 14 ̶