875800 User manual
TLS electronics GmbH Contact: [email protected] 21
Note:
This function is only effective for CEC supported and enabled displays.
CEC Auto control:
Enable/disable CEC Auto-control
Delay Timing:
Set the delay time of turn off display after receiving CEC
command. The range is 0~30 minutes.
CEC Manual Control:
Turn on/off display by CEC command manually.
RS232 Controller
PathFinder 4.0 is built in RS232 controller, and able to save RS232 Wakeup and
Standby Commands of display and turn on/standby the display through
connected RS232 port by auto-detecting source status.
RS232 Wakeup Command:
Input the RS232 Wakeup Command of connected
display, and click
Save
button.
Note: The command length is up to 64 characters.
RS232 Standby Command:
Input the RS232 Standby Command of connected
display, and click
Save
button.
Note: The command length is up to 64 characters.
Baud Rate:
Set the Baud Rate of connected display.
Parity Bits:
Set the Parity Bits of connected display.
