875800 User manual
TLS electronics GmbH Contact: [email protected] 11
Application 4: Grouping Mode
In Application 4, Device 1 and Device 2 work in Group 1, while Device M and
Device Z work in separate Group Z. Devices in different groups can not select or
display sources from other groups. Grouping mode is simply activated by Telnet
API or clicking the Daisy-chain Grouping option on the WEB GUI of device, then
the video will stop to be outputted to backward devices.
For example, set Device 2 in grouping mode to make Device 1 and Device 2
work as Group 1, then Device 3 and all backward devices are in the other group;
set Device 2 and Device 4 in grouping mode to make Device 1 and Device 2 in a
group, Device 3 and Device 4 work in a group, Device 5 and backward devices
in the other group (More details please check Page 16.) Both Chain-type and
Ring-type connection could support grouping mode.
Before set up, please take care of below steps:
1. Connect a PC to each device by Ethernet port, log in their WEB GUI to set
static IP address and alias name for every device. (Please check Page 13 to
learn how to log in WEB GUI.)
2. Connect all devices by HDBaseT ports through Cat cable, make a Chain-type
connection firstly and feed LAN access to Ethernet port of any device.
Do not
make Ring-type connection directly with LAN access, otherwise there will
be LAN conflicts and LAN control disabled.
3. Log in WEB GUI of the first device in the chain, input total quantity of devices
cascaded within Daisy-chain Sequence and then click Start Sequence.
