875800 User manual
TLS electronics GmbH Contact: [email protected] 20
EDID
To set the EDID by WEB GUI, adjust the EDID switch to Position 9 firstly.
For example, if user wants to write the HDMI OUT EDID of Pathfinder 1 to HDMI
IN of PathFinder 2, log in Pathfinder 1's WEB GUI, click
Open Dialog
button of
EDID Read
, save the Bin file, and then log in PathFinder 2's WEB GUI, click
Open Dialog
button of
EDID Write
, import the Bin file.
Note:
For EDID write, HDMI/DP/HDBT supports 256 bytes only, VGA supports
128 bytes.
Control
This sub-menu is used to perform the following tasks:
CEC Controller
RS232 Controller
RS232 Pass-through
CEC Controller
PathFinder 4.0 has a is built in CEC controller, and is able to turn on/off display by
sending CEC commands to display via HDMI output port automatically.
