background image

875760 HDBaseT/HDMI/Audio Matrix 4x4 

TLS electronics GmbH 

 

[email protected]

  - 4 - 

 

Table of Contents 

 

1.  Introduction.............................................................................................5 

2.  Features.....................................................................................................5 

3.  Panel  Descriptions.......................................................................................6 

4.  Remote Control Descriptions......................................................................10 

5.  Specifications...............................................................................11 

6.  Application  Diagram...........................................................................12 

7.  Package Contents......................................................................................13 

8.  RS-232  Pin  Assignment.......................................................................13 

9.  RS-232  and  Telnet  Commands  ...............................................................14 

10. GUI  control..............................................................................................16 

11. Maintenance..............................................................................................27 

12. Warranty  Policy...................................................................................27 

13. Limitations  of  Warranty........................................................................27 

14. Exclusive  Remedies...........................................................................28 

15. RMA  Policy...........................................................................................28 

Summary of Contents for 875760





























Reviews: