875760 HDBaseT/HDMI/Audio Matrix 4x4
TLS electronics GmbH
[email protected] - 17 -
“General” page
1. Select control mode: RS232 COM mode (Auto COM ports detected) or TCP
mode
2. List detected COM ports
3. List all Matrix devices after search operation
4. Click to search all Matrix devices that connected in same subnet
5. Click to configuration the selected Matrix’s TCP control configurations
6. Click to connect or disconnect PC and Matrix ( Connection will be
established automatically before control commands sending )
7. Click to refresh device status: include device information displayed in
⑨
area
and Input/output port connection status in
⑩
area.
NOTE: Tab pages cannot be changed during control command is processing.
8. To enable or disable Input/output tags displaying when setting buttons on
“Setting” page focused
9. Device information display area
10. Input/output port connection status
