TLA CTS-5-C, Manual

Page: 9 / 32

2
1 Initial Operations
Congratulations on the purchase of your Tuning Set CTS-5. It will make the tuning of all kinds of
musical instruments much easier. Part 1 of these operating instructions contains general
information about the Tuning Set. Part 2 gives examples on how to learn the most important
functions, and part 3 is for those of you who want to know all about this Tuning Set.
1.1 Power
The Tuning Set CTS-5-C can be operated with a plug-in transformer, or with
battery power. Four batteries type Mignon 1.5 Volt are needed for approx. 6 hours of operation.
When the batteries are empty, the LC-Display will show "LOW BATT.". For frequent battery
operation a rechargeable set of NiMh cells, type Mignon 1.2 Volt, with a battery charger is
advisable, and should be available at your local radio dealer. With 2500mAh NiMh cells, the
Tuning Set should run approx. 14 hours on one charge.
REMARK: The socket for the plug-in transformer cannot be used as a socket for the battery
charger. The batteries are automatically disconnected when the plug-in transformer is used.
WARNING ! CHECK THE POLARITY WHEN REPLACING BATTERIES.
1.2 Switching on the Tuning Set.
Switch on the Tuning Set with the slide switch on the
right side of the Tuning Set. For approx. one second
you see the program version, and then the following
indication:
Should one of the next two indications appear, please go to the next paragraph.
>1< STIMMEN ->
>1< TUNING ->
>1< ACCORDER ->
>1< ACCORDARE->