20
3.7 Special settings
In the same way that a language can be selected, it is possible to change some other attributes
of the set, so that you can optimize the CTS-5-C for your application. The settings will be
permanently stored, even if the device is switched off. Operate as follows:
1.
Switch off the device.
2.
Hold key "A" pressed while switching on the device,
and keep it pressed until the following display
appears:
With „< >“ you may switch the illumination on or off.
Press „E“.
With "< >" you adjust the timer switch on or off.
On: The device automatically turns off after 15
Minutes without operation.
Off: The device will not be turned off by timer.
Press „E“.
With "< >" you may select a mode number. This mode will be
selected immediately after turning the unit.
Press "E", the settings will be stored, and the device turns
into normal operation.
ILLUMINATION
on
TIMER
on
FIRST MODE
1 TUNE
Summary of Contents for CTS-5-C
