TL Ultralight TL-3000 Sirius, Flight And Operational Manual

Page: 59 / 64

Flight and operational manual
TL 3000 SIRIUS
Page 58
CAUTION:
It is necessary to avoid excessive pressure effect on the airframe
structure and propeller, especially on the wing tips, struts, empennage,
etc.
NOTE:
Passing through the narrow places requires assistance by instructed personnel
ensuring aircraft wing tips handling.
8.6.2. Aircraft assembly and disassembly for the land transport
The aircraft can be transported on the land communications when
loaded on a trailer. It is necessary to disassemble the aircraft
beforehand.
NOTE: The aircraft assembly and disassembly do not require a special qualification.
NOTE: After cleaning off the grease, all connecting points must be again
greased with grease.
8.6.2.1 Aircraft disassembly procedure
ƒ
Remove the centroplane interior roof cover and assembly openings
covers
ƒ
Unscrew the aileron control rods bolts
ƒ
Disconnect the Pitot ‐ static system PE hoses
ƒ
Disconnect the wing electrical wiring
ƒ
Disconnect the wing fuel piping
ƒ
Disconnect and disassemble the connecting flap torsion drive in the
fuselage
ƒ
Access the strut attachments by moving the aerodynamic fairings
down the strut.
ƒ
Unscrew the main and auxiliary wing attachment and strut pins
ƒ
Take out the strut pins (the wing must be held by an assistant)
ƒ
Take out the main and support spar pins
ƒ
Push the wing out off the
centroplane