TL Ultralight TL-3000 Sirius, Flight And Operational Manual

Page: 32 / 64

Flight and operational manual
TL 3000 SIRIUS
Page 31
NOTE:
Release the flag ‐ fitted rescue system activation handle operational fuse – turn
the handle towards both sides approximately 45° around the rotation axis
and ensure there is a sliding contact between the handle and console casing
4.3.2 Pre ‐ start actions and starting up
1. Fuel tap open
2. Main switch switch on
3. Ignition 2x switch on
4. Instruments switch on
4. Gas lever idle run, eventually 10 % of power output
5. Balancing on the centre
6. Choke according to the engine temperature
7. Area in front of the propeller check clearance
8. Starter push
9. After start ‐ up idle run
10. Other instruments switch on
11. Choke push in
12. Engine heating see paragraph 4.3.3
Caution : Continue starting during maximum 10 sec., cool down for 2 min after
that.
4.3.3 Engine test
The engine warm up procedure, and engine and ignition tests are in detail
described in the engine manual.
Continue engine warming up for approximately 2 min. at 2000 rpm and
continue at
2500 rpm until the oil temperature of 50 °C is achieved.
ƒ
Ignition test at 4.000 rpm, each loop rotation speed drop cannot
exceed 300 rpm; the rotation speed difference between the loops
cannot exceed 120 rpm.
ƒ
Gas lever at 5.000 rpm during 30 seconds 3x and smoothly transit
from the idle run to the maximum rotation speed (5.800 rpm)
ƒ
Set idle run