TKS
22
2.1 Installing the power supply
All electrical installations must be carried out by an authorised electrician.
Use a supply cable with the correct cross section (2,5 mm
O
)
Adjust the motor protection to a suitable current draw:
230V = 9A
400V = 6A
3 Maintenance and care
Checklist for
maintenance and care
NB!
Always unplug the machine before
carrying out inspection maintanance or
repair.
• Clean the Conveyor TR belt, foot
bearing, drum and bearing shields as and
when
necessary and at least once a month.
• The carrier belt must be kept taut. This is
particularly important during the initial
operating period. Must be re-tightened every
week during the fi rst month of use. It is
important to tighten it in order to avoid
damage to the carrier belt. It must not be
tightened screw. Turn the screws an equal
number of revolutions on each side.
• Lubricate the foot bearing
• The oil in the worms should not be exposed
to temperatures below -30 C
o
. For the
machine to functionoptimally below -30 C
o
,
contact the manufacturer for advice and
guidance.
Summary of Contents for AGRI Conveyor TR
