TKO 3R, Assembly Manual

Page: 20 / 30

20
STEP 8-a & b
STEP 8-c
STEP 8 – Seat Support Assembly
There are 2 holes approximately one inch apart toward the front of the rail.
a.
Install the Rubber Bumper (53) onto the Rail ( Hole 1 ) using 1 Bolt
(M8px1.25x115mm) (118), 1 Nut (M8) (124). Tighten it securely with Philip
Screwdriver.
b.
Install the Rail to the Seat Rail Support Bracket (2) (Factory preinstalled) in the
Main Frame Assembly, secure it using 2 Washers (8x16x2.0t) (90), 2 Lock
Washers (M8) (88) and 2 Bolts, Socket Head (M8xp1.25x16mm) (112) in Hole
2. Make sure the Lock Washer are in between the Bolt and the Regular Washer.
DO NOT tighten these 2 Bolts yet.
c.
Install 4 Bolts, Socket Head (M8xp1.25x16mm) (112), 4 Lock Washers (M8)
(88) and 4 Regular Washers (8x16x2.0t) (90) to the Main Frame Assembly
from the bottom of the Rail. DO NOT tighten these Bolts yet.