Kossel Model A User Manual Page 20
3.
Once the model has loaded, reposition the part to the desired location and orientation on the printer bed. To
reposition the model, click, hold, and drag it to the desired location in the printer’s volume, identified by the shaded
blue area.
Note:
the orientation will determine if support structure is required. Reference the Printing Settings Definitions
section for help manipulating the part.
4.
Verify and adjust any of the Basic and Advanced printing settings. See the Printer Settings Definitions section for more
detailed information on these settings.
Note:
Hovering the mouse over a setting will bring up a description of how the setting will affect the print.
5.
Insert the SD card into your computer. Click the SD card icon in the top left of the print window to save your files to the
SD card.
Your files are now loaded onto the SD card, and you are now ready to print. The next section will
detail the steps to print directly from your SD card.
