Kossel Model A User Manual Page 16
Filament
Diameter (mm):
This describes the diameter of the filament being used. This value should be adjusted to the standard TKI
filament of 1.75 mm.
Flow (%):
This describes the amount of filament being pushed through the nozzle. This value can be adjusted to optimize
the quality of the print. A typical value is between 90-100 % for your TKI printer. If excessive plastic is being extruded,
reduce this value by 5%.
Advanced Settings Defined
The Advanced tab parameters are printer specific and most will only need to be adjusted once. The figure below
shows the typical advanced tab settings for your TKI printer. A detailed explanation of each parameter can be
found below in the figure.
