background image

TKH Security Proposal | RFP Name | RFP Number 

 

  

TKH Security | Siqura WP10 | 

Installation manual v2.0

 

 

Preserve this manual as a reference for future needs

 

Nothing from this publication may be copied, translated, reproduced, and/or published by 
means of printing, photocopying, or by any other means without the prior written 
permission of TKH Security. 

TKH Security reserves the right to modify specifications stated in this manual. 

Brand names 

Any brand names mentioned in this manual are registered trademarks of their respective 
owners. 

Liability 

TKH Security accepts no liability for claims from third parties arising from improper use 
other than that stated in this manual. 

Although considerable care has been taken to ensure a correct and suitably 
comprehensive description of all relevant product components, this manual may 
nonetheless contain errors and inaccuracies. We invite you to offer your suggestions and 
comments by email via 

[email protected]

 Your feedback will help us to further improve 

our documentation. 

How to contact us 

If you have any comments or queries concerning any aspect related to the product, do not 
hesitate to contact: 

TKH Security B.V. 
Meridiaan 32 
2801 DA Gouda 
 

Used electrical, electronic and stainless steel products should not be mixed with 
general waste. For proper treatment, recovery and recycling of old products, take 
them to applicable collection points, in accordance with your national legislation 
and the Directives 2011/65/EU and 2012/19/EU. 
By disposing of these products correctly, you help to save valuable resources and 
prevent any potential negative effects on human health and the environment which 
could otherwise arise from inappropriate waste handling. For more information 
about collection and recycling of old products, contact your local municipality or 
your waste disposal service. Penalties may be applicable for incorrect disposal of 
this waste, in accordance with national legislation. 

Summary of Contents for Siqura WP10













Reviews: