MAX MIX SERVICE & ASSEMBLY MANUAL
You will need the manual for safety warnings and precautions, assembly instructions operating and
maintenance procedures, parts list and diagram. Keep your invoice with this manual for your record. Keep
manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this equipment, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment.
Read all instructions before using this equipment
1.
Keep work area clean.
Cluttered areas can cause injuries.
2.
Observe work area conditions.
Do not use machines or power tool in damp or wet locations. Do
not expose to rain. Work in a well-lighted area.
Do not use electrically powered tools in presence of flammable gases or liquids.
3.
Keep Children away.
Children must never be allowed in the work area.
Do not let them handle machines, tools or extension cords.
4.
Store idle equipment.
When not in use tools & equipment must be stores in a dry location to
inhibit rust. Always Lock up tools and keep out of reach of children
5.
Do not force equipment.
This unit will perform better and safer at its intended rate. Do not use
inappropriate attachments in an attempt to exceed the capacity/capability.
6.
Use the right equipment for the job.
Do not attempt to use this unit as a larger industrial mixer,
do not use this unit for a purpose for which it was not intended.
7.
Dress Properly.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective electrically non-conductive clothes and non-skid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
8.
Use eye and ear protection.
Always wear ANSI (American National Standards Institute) approved
impact safety googles, wear a full face shield if you are producing metal fillings or wood ships.
Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical
dust and mists.
9.
Do not overreach.
Keep proper footing and balance at all times. Do not reach over or across
running machines.
10.
Maintain Equipment with care.
Keep the unit clean for better and safer panoramic. Follow
instructions for lubricating and changing accessories. Inspect cords periodically and if damaged,
have them repaired by an authorized technician. The handle must be kept clean, dry and free
from oil and grease at all times.
11.
Disconnect power.
Unplug when not in use, or when cleaning, lubricating, or adjusting the mixer.
12.
Remove adjust keys and wrenches.
Check that keys and adjusting wrenches are removed from
the unit or work surface before plugging it in.
13.
Avoid unintentional starting.
Be sure the switch is in the OFF position when not in use and
before plugging in.
14.
Stay alert.
Watch what you are doing, use common sense. Do not operate this unit when you
tired.
Summary of Contents for Max Mix
Page 6: ...6 PARTS BREAKDOWN...
Page 7: ...7 BOLTS BREAKDOWN...
