FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 9 of 18
15/03/2021
27.
Loosely secure in place at the positions
shown using M10 x 1.25 x 30mm hex
screws (4), M10 spring washer (4) and
M10 x Ø30mm flat washer (4).
28.
Secure bracket loosely using the following
fasteners:
28.1.
M10 x 1.25 x 30mm hex screws (3),
M10 x Ø30mm flat washers (6) &
M10 nyloc nuts (3).
28.2.
M12 x 1.25 x 35mm hex screws (2),
M12 x Ø32mm x 2.5mm flat
Washers (4) & M12 nyloc nuts (2).
Repeat on LHS.
29.
Centralize the bar mount / winch frame to
the vehicle by measuring diagonally from
mount tip to headlamp corner as shown,
equalize as close as practical.
Tighten all winch frame and chassis mount
bolts from previous steps to relevant torque
settings listed on page 1.
RHS SHOWN
