FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 10 of 18
15/03/2021
30.
Fit clamp Angle bracket to inboard face of
winch frame and washer plate to front using
M12 x 1.25 x 35mm bolts (3),
M12 x 32mm x 2.5mm flat washer (6) & M12
nyloc nuts (3).
Important
– fit M12 bolt assembly with bolt
head on front face.
31.
Align plate with existing holes and edges,
tighten to specified torque. Check holes and
slots align after tightening to allow easy bolt
fitment/clearance.
Repeat on LHS.
NUTS
TO INSIDE!
RHS SHOWN
Clamping
angle
Holes must
align
