FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 4 of 18
15/03/2021
MARK BUMPER WHILE STILL ON VEHICLE.
NOTE: BUMPER TRIM GARNISH SHOULD
REMAIN ON BUMPER TO BE MARKED/CUT
1.
Affix the supplied bumper trim template
(F-31638) to the vehicle.
2.
Mark a point on the indicated bumper
contour 125mm verticaly down from the
headlight bumper contour.
3.
Extend a line across the bumper from the
bumper trim template to the point marked in
4.
Extend a line from the point marked in step
2 to the bottom spar in the lower grille
opening.
REPEAT ABOVE STEPS FOR THE
OPPOSITE SIDE OF THE VEHICLE
5.
Remove & retain the number-plate,
discarding the fasteners.
6.
Remove & retain the plastic clips /
fasteners (8) that secure the top of the
grille/radiator shroud.
7.
Remove shroud.
RHS SHOWN
RHS SHOWN
STEP 2
125mm
GARNISH TO
REMAIN ON BUMPER
STEP 4
