TJM Pro Series Twin Compressor: Installation and User Manual
For product warranty please refer to our website www.tjm.com.au
File: F-31070
Page 8 of 23
23/02/2021
Air Filter Installation
Ensure filter is assembled in a dry working environment.
o
Each compressor has a two-stage air filter
supplied loose which must be installed prior to
operation.
o
Remove the protective plug from the
compressor inlet port.
o
Screw the filter housing into the port.
NOTE: Hand tighten only.
o
To replace the filter elements, pull the outer
cover from the air filter assembly.
o
Remove the foam and felt elements and
replace.
o
Press the outer cover back into place, ensure
that the clips on the housing are aligned to
make a secure fit.
NOTE:
Check the Air Filter elements at frequent intervals. If Air Filters become damaged, wet, or dirty.
DO NOT use the compressor until air filters are replaced. Contact a TJM Distributor for service.
