13 – ENGLISH
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not
connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1.
Turn on the Music to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2.
Turn on the Bluetooth wireless technology on your enabled device.
3.
Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate
searching. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will
change from “Not Paired” to “Connected”.
4.
You will hear a ring tone from the Music confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should not have
to pair your device again.
Depending on your device, you may need to make multiple
attempts at Pairing and/or Connecting to the Music , but please give your device
adequate time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod touch/iPad
1.
Turn on the Music to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2.
Select “Settings”.
3.
Select “General”.
4.
Select “Bluetooth”.
5.
Switch Bluetooth
“On” to initiate searching.
6.
Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are prompted to
enter a PIN, enter “0000”. “Tivoli Bluetooth will change from “Not Paired” to “Connected”.
7.
You will hear a ring tone from the Music and you can begin playing your music files wirelessly.
Adjust the volume level on your device. You should not have to pair your iPhone/iPod/iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check the settings
in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on your
iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing process.
Depending on your device, you may need to make multiple attempts at Pairing and/or
Connecting to the Music , but please give your device adequate time to Pair or
Connect before repeating the process.
When streaming music, you can press the blue arrow to the right of the next track button >>| on the
iPhone/iPod touch/iPad display to alternate between the iPhone/iPod/iPad and Bluetooth.
• The Music will remember pairing information for up to 8 devices. Additional devices
can be paired, but the least-recently used device will be replaced by the newly paired device.
• If the audio drops out or stops during playback, move your device closer to the Music ,
or check to be sure another wireless device is not interfering with the signal.
When switching from Bluetooth to DAB or FM, you may need to re-adjust (lower) the radio’s volume level.