www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458
Copyright © 2021 Tivoli 11.24.2021
7170805
Page 8 of 11
FLEX120
| Installation
1 1/4”
Apply Adhesive
(ADH-MB-75AM-10)
to the inside of
the flanges, as shown, to adhere the channel to the
mounting surface. Also, apply glue to the bottom of the
channel if there is a solid support at the bottom of the
cutout.
7
NOYES Channel With Lens
Side View
NOYES Channel
Part No: NOYS-CHAN-SLV-6.5
NOYS-EC-01
Solid End Cap
Installation Option 3B:
Mounted in NOYES Channel with Spring Clips
Insert Power Feed Cable through
grommet in Power Feed End Cap. Slide
Power Feed End Cap along the Power
Feed Cable until it reaches the NOYES
Channel. Attach to NOYES Channel.
Attach the Lens. Start the Lens into the Channel at one end and
press down. Continue to press along the lens, working it into the
Channel.
Attach Lead Wire to Power Source.
Use Solid End Cap to close non-power feed sides
of NOYES Channel. Attach Solid End Cap to NOYES Channel.
4
6
5
NOYS-EC-02
Power Feed End Cap
NOYS-SPRING-CLP
Clip, Spring, Metal
Power Feed Cable
Summary of Contents for FLEX120
Page 1: ...IP65 FLEX120...
