www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458
Copyright © 2021 Tivoli 11.24.2021
7170805
Page 7 of 11
FLEX120
| Installation
1”
.949”
1.812”
1.031
.673”
1 1/4”
Cut NOYES Channel to size required, if needed.
Apply Adhesive
(ADH-MB-75AM-10)
to the inside of
the flanges, as shown, to adhere the channel to the
mounting surface. Also, apply glue to the bottom of the
channel if there is a solid support at the bottom of the
cutout.
Remove Backing tape and apply FLEX120 to bottom
surface of the NOYES Extrusion.
Slide a Spring Clip into the outside slot at the bottom
of the NOYES Extrusion. Position a Spring Clip on the
left and right side at each end. There may be additional
Spring Clips needed along the length of the Channel,
depending on length. Position Clips every 24”.
1
6
2
3
Installation Option 3A:
Mounted in NOYES Channel Glued to Surface
Installation Option 3B:
Mounted in NOYES Channel with Spring Clips
NOYES Channel With Lens
Side View
NOYES Channel With Lens
Side View
NOYES Channel
Part No: NOYS-CHAN-SLV-6.5
Cutting Tool
ADH-MB-75AM-10)
Adhesive
ALTON Channel
Part No: ALTN-CHAN-SLV-6.5
FLEX120 Tape
Part No: FLX120
Summary of Contents for FLEX120
Page 1: ...IP65 FLEX120...
