background image

www.tivolilighting.com    tel: 714-957-6101    fax: 714-427-3458

Copyright © 2020 Tivoli 05.20.20

ADNM-DTV   Flicker-Free TV Studio Camera Installation Instructions

7170445

Page 3 of 8

720D Driver Connections

M

LINEARdrive 720D

12-28V / 24W Direct voltage controlled LED driver

TC

Group 1

Group 1 GND

Group 2

Group 2 GND

Group 3

Group 3 GND

Group 4

Group 4 GND

Ext in +

Ext in

 -

DMX in +
DMX in -

LedSync out +
LedSync out -
LedSync shield

DA -

DA +

DA -

DA +

Ext in +

Ext in -

DA +

DA -

DA +

DA -

DMX in +

DMX -

DMX in shield

LedSync out +

LedSync -

LedSync shield

Channel 1, Red
Power
Channel 2, Green
Power
Channel 3, Blue
Power
Channel 4, White
Power

M

LINEARdrive 720D

12-28V / 24W Direct voltage controlled LED driver

TC

Group 1

Group 1 GND

Group 2

Group 2 GND

Group 3

Group 3 GND

Group 4

Group 4 GND

Ext in +

Ext in

 -

DMX in +
DMX in -

LedSync out +
LedSync out -
LedSync shield

DA -

DA +

DA -

DA +

Ext in +

Ext in -

DA +

DA -

DA +

DA -

DMX in +

DMX -

DMX in shield

LedSync out +

LedSync -

LedSync shield

Channel 1, Red
Power
Channel 2, Green
Power
Channel 3, Blue
Power
Channel 4, White
Power

12V-48V DC IN

To connect the driver to a 12-48V DC power supply, connect 

the power supply positive voltage supply wire to the VDC+ 

connector and the negative voltage supply wire to the VDC-

connector. The driver and LEDs can use the same power 

supply.

EXT in

Connect an external control device to the driver’s Ext in+ 

and Ext in- connectors. Configure the driver for use with as 

external control device over the 3-button user interface.

DA+ / DA-

Use these connectors to connect the driver to a DALI network. 

Always combine a DA+ and a DA- connector for either data 

input or data output.

DMX in/LEDSync out

Use these connectors when the driver is used in a DMX 

network.

For DMX in, connect the network cable’s DMX+, DMX- and 

DMX shielding wire (the orange/white, orange and brown wire 

in a CAT5 cable) to the DMX in+, DMXin-, and DMX in shield 

connector respectively.

For LEDSync out, connect the network cable’s data+, data- 

and shielding wire to the LEDSync out+, LEDSync out- and 

LEDSync shield connector respectively.

LED Lighting

Indicates the location of the connectors for your LED lighting. 

Red represents channel 1, Green represents channel 2, Blue 

represents channel 3 and White represents channel 4. The 

default group color allocation can be changed over the 3 

button user interface.

Summary of Contents for ADNM-DTV









Reviews: