10.
Power Cord Protection
— Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point
where they exit from the product.
11.
Object and Liquid Entry
— Never push objects of any kind into this product through cabinet slots, as the objects may
touch dangerous voltage points or short certain product parts, resulting in the risk of fire or electric shock. Never spill
liquid of any kind onto this product.
12.
Damage Requiring Service
— The appliance should be serviced by qualified service personnel when:
A. the power supply cord or plug is damaged or frayed;
B. liquid has spilled into the product;
C. the product has been exposed to rain or water;
D. the product does not operate normally when you follow the operating instructions (adjust only those controls that
are discussed in this guide, as improper adjustment of other controls may result in damage, often requiring extensive
work by a qualified technician to restore the product to normal performance);
E. the product has been dropped or the cabinet damaged; or,
F. the product exhibits a distinct change in performance.
13.
Servicing
— The user should not attempt to service the appliance beyond the steps described in the Troubleshooting
section of the guide. All other servicing should be referred to qualified service personnel.
14.
Cleaning
— Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners;
use a damp cloth for cleaning. If the product comes in contact with any liquid, unplug the power cord and let the unit dry
thoroughly before plugging it back in.
15.
Power Source
— This product should be operated only from the type of power source indicated on the marking label or
in this guide. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
16.
Overloaded Power Outlets
— do not overload wall outlets and extension cords, as this can increase the risk of fire or
electric shock.
17.
Coaxial Cable Grounding
— For this product, the coaxial cable shield/screen shall be grounded as close as practical to
the point of entry of the cable into the building. This recommendation is pursuant to Article 800-93 and Article 800-100
of the NEC, which provides guidelines for proper grounding of the coaxial cable shield.
18.
Electric Shock
— To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified service
person when service or repair work is required. Opening or removing the product’s covers may expose you to dangerous
voltage or other risks. Incorrect reassembly can cause electric shock when this product is subsequently used.
19.
Moving
— To avoid accumulative shock, avoid moving the unit while it is plugged in.
20. CAUTION — There is significant danger of explosion if the product’s battery is replaced replaced. Replace the battery
only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries in strict accordance
with the manufacturer’s instructions.
