TiVo Media Device, Manual

Page: 79 / 139

Settings
67
5
Wired (Ethernet) Network Settings
Most of the time, you will not need to configure these settings, as they are usually configured
automatically when you first set up your media device. However, if necessary, you can use this
page to configure how the TiVo
® Media Device receives an IP address, or you can assign a
static IP address and other network information manually. Follow the on-screen instructions to
configure your wired network.
Wireless Network Settings
To connect to your wireless network, you may need the name (SSID) of your wireless network
and its password/key (if any).
•
Enter Wireless Network Name.
This screen lists the names of nearby wireless networks that
your media device has been able to identify. If you have a wireless router (or wireless access
point) and you did not set a network name, your network is probably using a name supplied
by the router’s manufacturer.
If your network’s name is listed, select it. (You may be able to see more network names by
pressing CHAN DOWN to scroll down the screen.)
Otherwise, select Enter Network Name, then select Finished Entering Text when you are
finished.
•
Enter Network Password.
If your network has a password, enter it and then select Finished
Entering Network Password. If your network does not have a password, select My Network
Doesn’t Have a Password.
You must use capital and lowercase
letters appropriately when entering a
network name and password. To find a
network named “My Network” you must
capitalize the “M” and “N”; entering “my
network” won’t work. Use the THUMBS UP
and THUMBS DOWN buttons to change to
uppercase or lowercase.
®